A GaN-powered Thunderbolt 4 dock wants to rid data-hungry setups from its power bricks

For power users who deal with a high-resolution display or two, large data transfers, and multiple PC peripherals that need power, perhaps 10 Gigabit Ethernet, a Thunderbolt base can add useful high-speed ports while running a supportive computer, such as a MacBook. This helps simplify the office setup, but it also usually comes with a highly efficient power brick to add to the mix. Gallium Nitride (GaN) from Hyper HyperDrive Thunderbolt 4 Hubwhich launched crowdfunding on Monday, hopes to change that.

Hyper, a manufacturer of PC hubs, docking units, portable chargers and the like, is seeking crowdfunding for a Thunderbolt 4 hub that it claims is the first “Thunderbolt 4 hub with an integrated GaN power supply.” The dock is a small, round-edge box that provides one Thunderbolt 4 port and three Thunderbolt4 downstream ports with up to 40Gbps playback and the attendant unstable power bricks.

However, Hyper isn’t ready to launch its own dock just yet; He is currently undergoing Kickstarter Campaign.

Kickstarter Concerns

Crowdfunding projects are a risky endeavor, Hyper admits on the Thunderbolt 4 dock’s crowdfunding page. But it should be noted that Hyper has successfully funded similar projects, such as HyperDrive Duo USB-C Hub for MacBooks, which claim to be the “most crowdfunded MacBook and USB-C accessory” and HyperJuice 100W GaN The charger, which the seller says is “the most crowdfunded USB-C charger.” Thunderbolt 4 Power Hub is Hyper’s 28th crowdfunding project.

The Thunderbolt 4 Hub’s Kickstarter page says development began in February 2021. The device is said to be Intel certified and is supposed to ship to early backers in November.

The development is at least far enough along that Hyper was able to give samples to it Mac cult(which reported speeds in line with competing Thunderbolt products).

For those who prefer to have product security formal before money is put on the line, Hyper expects the Thunderbolt 4 Power Hub to sell for a hefty price tag, even at $300 Thunderbolt 4:300 standards.

Gain Gain

The secret to the Thunderbolt 4 Power Hub’s portability is its use of GaN semiconductors, rather than silicon, for a smaller design. Other Thunderbolt 4 docks, such as Pluggable Thunderbolt 4 Hubmay have a small central dock but is also connected to an appropriately sized power brick before being attached to the wall.

Meanwhile, the brick-free Hyper hub measures 4.9 x 4.9 x 1.25 inches and 1.4 pounds, according to Cult of Mac (although final specifications may vary, since the hub is still crowdfunded).

Single upstream port supports 96W power delivery, enough to support many small laptops, such as MacBook Pro, but not enough for devices that consume a lot of power, such as gaming laptops. Notably, the included Thunderbolt 4 cable is 2.6 feet long, while the power cable is 6 feet long.

Meanwhile, the three Thunderbolt 4 downstream ports can output 15W of power, which is enough for smaller devices, such as a smartphone.

Thunderbolt 4 bumps Thunderbolt 3’s 16Gbps PCIe rate to 32Gbps, and Hyper Center claims to be able to make the most of that, making it suitable for external storage devices and eGPUs.

Hyper notes that Thunderbolt 4 Hub cannot solve Apple M1 and M2 problems Multiple screen limitations. While Hub claims to support up to an 8K monitor at 60Hz (or 4K at 144Hz), or two 6K displays at 60Hz, this won’t work with a Mac running the M1 or M2.

Running two monitors at speeds over 4K and 60Hz requires that the monitors and GPU support Display Stream Compression 1.2 and DisplayPort 1.4 HBR3. This means that you cannot use a file LG UltraFine 5K In a dual screen setup with the hub too.

It is also worth highlighting that this is a Thunderbolt 4 hub exclusively, which means that no other connection is available. For comparison, the Thunderbolt hub mentioned on Plugable has a USB-A port for improved versatility.

Ars Technica may receive compensation for sales from the links in this post through Affiliate Programs.